MKV GTi/Golf/Rabbit 8" & 10" Perfect Fit™ Enclosure Are here!

The new MKV GTi/Golf/Rabbit 8" & 10" Perfect Fit™ enclosures have now been added to our lineup. Because of a lack of cargo area, we designed this enclosure to be as small as possible and to fit up out of the way in the driver's side cubby.  It was developed around the more popular mid priced woofers and will fit most mid level 8' & 10" woofers (Jl W3, Alpine type-s).  The enclosure mounts using two factory bolt locations for a perfect fit. We even managed to make an instruction video, found here.

5th gen Camaro 10" Perfect Fit™ Custom Fiberglass Enclosure Is Completed!!

The new 2010 Camaro Perfect Fit™ enclosure has now been added to our lineup. Because of a lack of cargo area, we designed this enclosure to be as small as possible.  It was developed around the more popular woofer depths and will fit most higher end 10" woofers (Jl W6, Alpine type-r). We also developed a grill for the enclosure, which provides protection from cargo. The enclosure mounts using two factory bolt locations for a perfect fit.  We even managed to make an instruction video, found here
Pictures:

5Th Gen Camaro Perfect Fit Enclosure™ on it's way

We're excited to get this one going, it's still in developmental stage, but we should start the
mold process soon. I don't think we even have any real good pictures, most got washed out by the sun or had bad lighting. Our main concern was space, these trunks are very limited. When you first open the trunk it seems as there is a lot of room, but stuff some luggage in there and you'll be second guessing it. We designed it to save room as usual, but also to get proper airspace and be able to stuff a decent sized woofer in there as well. We hope to move along with this one shortly.





























Pretty washed out picture below, but shows the small footprint of the enclosure.

Volkswagen 8" and 10" Perfect Fit Enclosures™

The Volkswagen MK5 8" & 10" Enclosures are almost here! We had a busy summer and these took a bit longer to get to to this point. We wanted to give people a couple options, so this was our first venture into the 8" category. The technology these days is pretty crazy, and there is a lot of output to gain from an eight inch woofer especially for those wanting to save the most space. We also built a 10" enclosure at the same time as well. We're hoping if all goes well to release these in mid to late september. Stay tuned...












































Edit (9/5/09) Molds are done, still have a few weeks to go to get it all together...

08 Subaru Sti/Wrx Perfect Fit™ Slimline Fiberglass Enclosure is complete!!

December 9th

The new 08+ Perfect Fit™ Sti/wrx Hatch enclosure has now been added to our lineup. Because of a lack of cargo area, we designed this enclosure to be as small as possible. Most of our previous designs are developed around the more popular woofer depths, with this design we were somewhat limited, so it's designed around entry to mid level 10" woofers. We also developed a grill for the enclosure, which provides protection from cargo. The enclosure mounts using two factory bolt locations for a perfect fit. We also made an instruction vide, found here.

Surgeline Tuning Grand Opening!!

October 4th -

Surgeline Tuning's grand opening was a smashing success, local vendors were on hand showing off their goods (including ourselves). SurgeLine Tuning will focus not only on Subarus but will extend its reach into other performance markets such as Nissan 350z, Nissan GTR, MazdaSpeed 3, 6, and Cx-7, Mazda RX8, Infinity G35/37, and Mitsibushi Evo. The Surgeline team has extensive experience and this means they can offer tuning services available no where else in the USA. We were glad to be apart of the grand opening, and had a good time, we were just hoping to be able to unveil our new 08 Sti enclosure at this event, but that will have to be another day. On to some pics from the event:

Some awesome welding work, done by Dustin Harris of Surgeline

08 Subaru Sti/Wrx Slimline enclosure in the works!!

Sept 08

We've been working on an enclosure for the new Subaru Sti/wrx hatch, there are a few snags we have run into along the way, but one key element has helped us tons. The 10" slim line woofer from Exile Audio(link). This woofer has enabled us to build a sleek looking enclosure and still maintain the trunk space. The enclosure is in the mold process now, and we hope to have it out before the holiday season. Be sure to check the blog frequently for updated information.

Here's a few sneak peeks:

Perfect Fit™ Enclosure for 05+ Mustang released

July 08

We finally got the enclosure done for the newer 05-08 Non-Sirius Ford Mustang, we had a million different directions we were going while working on this, so it took a while to get the mold going and finished, but it's done now and ready.

Specs:

Internal Airspace: 1.13-1.16 cubic feet
Mounting Hole Dia: 11 inches
Weight: 15 lbs.
Flush Trim Ring inside Dia: 11.25 inches

Each Enclosure comes with: Flush trim ring wrapped in black vinyl, high quality terminal cup with the ability to accept up to 8 gauge speaker wire, 3 to 4 feet of 12 gauge Phoenix Gold speaker wire for inside the enclosure, pre-drilled hole for mounting, mounting hardware with instructions, stuffed with polyfill sound dampening for smoother bass response, and Audio Integrations Full Warranty.
No Drilling Required!! This Perfect Fit Enclosure mounts firmly to your Mustang with only one bolt! We do provide a second mounting bolt and hardware if so desired for an even more secure mount. Once bolted down with the included hardware, your enclosure won't be going anywhere no matter how crazy you drive! Using a factory hole in your trunk and our pre-drilled hole in the enclosure it makes for an easy and stealthy install. The mounting hole in the enclosure is standard unless otherwise requested.  An install video can be found here.

On with some pictures:

Lightweight fiberglass headlights and dash for Pdx tuning time attack car

April 08

After Doing some headlight blanks and lightweight fiberglass dash for PDX tunings' time attack Sti, they prestented us with another similar project for the time attack Evo. We decided to bag a bit of carbon fiber into the molds we had built off of the factory headlights, we then cleared them with a satin finish and delivered them to PDX tuning. They also wanted a light weight dash similar to the subaru, and we had mentioned we still had the mold for the subaru one and that it was only a 1/2" or so difference in the dimensions between the two, so we popped another one off the mold for that as well.

Pics: